No longer a feeler: modded 80q for sale

Buy and Sell your parts here

No longer a feeler: modded 80q for sale

Postby elaw » Wed Oct 10, 2018 3:03 pm

Update October 14: the car is officially for sale! Asking price is $6,750. If you think that's crazy, contact me and we can talk. Price can also vary depending on what you want with the car... for example I've got an 07K engine and the original 4.11 diff if you want to do a conversion.

So, I hate to say it but I'm selling The Amazing Wonder Audi. I've put a ton of time, money, and effort into it but as I'm getting on in age I'm thinking about getting into something a little newer and less go-kartlike.

If you've got too much time on your hands and want to read all about it, my build thread is here: https://www.motorgeek.com/viewtopic.php?f=6&t=42240

If you don't have too much time on your hands, here are the basics:
1990 Audi 80 quattro sedan, white with gray cloth interior
Technically has about 250K miles but all drivetrain & suspension components have been replaced so that's pretty meaningless
AAN engine from urS6, making estimated 300 HP
Megasquirt MS3 with all the bells & whistles, controls fuel, timing (with knock control), and boost, bluetooth interface, SD-card datalogging
RS2 exhaust manifold (real, not Chinese)
Volvo K24-7400 turbocharger, self-rebuilt when I installed it a couple of years ago
Iroz 3" dowpipe, 3" race cat, two 2.5" Magnaflow mufflers, entire exhaust is stainless
1983 urquattro 016 transmission and rear diff (3.89), center and rear diffs both lock together
Retrofitted ABS/traction control from urS6
5-lug conversion, insanely light forged Fuchs summer wheels, urquattro winter wheels (both with decent tires)
Brakes: G60 calipers with EBC ceramic pads in front, more or less stock in rear
Suspension: H&R lowering springs, Boge turbo gas shocks, ball joints and F tie rod ends all new within the last few years/15K miles
Optima red top battery, relocated to the trunk
Depo e-code headlights, relayed, with DRL function


I really tried to do everything right on this car: almost all parts I fabricated are aluminum or stainless so they should last. Fuel lines are teflon. Not to pat myself on on the back too much but the tune is really good: AFRs are well-controlled, boost is well-controlled, it drives really nicely, and starts easily even when stored outside at 0 degrees F.

Rustwise I'd say it's 8/10 NOT considering its age. There's a very small amount of surface rust in a couple of mostly-invisible spots, but nothing even close to perforation. The paint is good for a 28-year-old car but not perfect. The interior is fair... a little dingy, the foam holding the cloth to the doors has broken down, fabric on the driver's seat is well-worn but there are no signifcant holes or tears.

The biggest issue right now is it needs an alignment. I had it aligned to some specs I made up and I don't think the guy fully understood what I wrote. So it feels very twitchy, and not "planted", especially on the highway. Having said that, when you throw it into a corner it sticks like it's on rails.

Anyhow, that's all I can remember now, if I think of more I'll edit this post. If you're interested or can offer any input re what the car's worth, please let me know!

Oh and if you're thinking of an 07K conversion, I have an 07K engine and the original 4.11 rear diff that could be included in the deal.

(Photos coming...)
Last edited by elaw on Sun Oct 14, 2018 8:44 am, edited 1 time in total.
Be alert! America needs more lerts.
Eric Law
'12 A4Q completely boringly stock
'90 80Q with AAN and Megasquirt
'97 Saab 9000 Aero: sold 5/2017, sorely missed
User avatar
elaw
 
Posts: 833
Joined: Jan 6, 2014
Location: MA, USA

Re: Feeler: very modded 80q maybe for sale

Postby mr_aj_johnson » Fri Oct 12, 2018 1:12 am

Really? Im not really looking but this could tempt me.
mr_aj_johnson
 
Posts: 192
Joined: Apr 22, 2013

Re: Feeler: very modded 80q maybe for sale

Postby elaw » Fri Oct 12, 2018 5:57 am

Yeah, I'm just starting to get an itch for something new and different.

The "new and different" was supposed to be the 07K engine, but I'm coming to the realization I'll probably never be able to swing the cost of the conversion parts, and don't really have the ability to make them myself - especially the most complex/expensive ones.

And as I indicated in the other post, the car's firm ride and the amazingly crappy roads between my house and my work aren't getting along well with my old arthritic bones and joints.
Be alert! America needs more lerts.
Eric Law
'12 A4Q completely boringly stock
'90 80Q with AAN and Megasquirt
'97 Saab 9000 Aero: sold 5/2017, sorely missed
User avatar
elaw
 
Posts: 833
Joined: Jan 6, 2014
Location: MA, USA

Re: No longer a feeler: modded 80q for sale

Postby elaw » Sun Oct 14, 2018 8:47 am

Shortly I'll be putting up a web page with tons of detailed info about the car and photos. But for now I've uploaded a few pix to my MG thread here: https://www.motorgeek.com/viewtopic.php?f=4&t=216857

Also if anyone has a B5 S4 to trade I'd consider it, but there are some specific requirements. The car must have no suspension mods, have a manual transmission, be in decent shape, and be able to be tuned by me (ie no chip tune that locks you out from making changes).
Be alert! America needs more lerts.
Eric Law
'12 A4Q completely boringly stock
'90 80Q with AAN and Megasquirt
'97 Saab 9000 Aero: sold 5/2017, sorely missed
User avatar
elaw
 
Posts: 833
Joined: Jan 6, 2014
Location: MA, USA

Re: No longer a feeler: modded 80q for sale

Postby elaw » Sun Oct 14, 2018 11:04 am

Web page is now up, with photos and contact form: https://www.thelawsplace.com/TweakedAudi80ForSale/
Be alert! America needs more lerts.
Eric Law
'12 A4Q completely boringly stock
'90 80Q with AAN and Megasquirt
'97 Saab 9000 Aero: sold 5/2017, sorely missed
User avatar
elaw
 
Posts: 833
Joined: Jan 6, 2014
Location: MA, USA

Re: Feeler: very modded 80q maybe for sale

Postby DE80q » Sun Oct 14, 2018 1:07 pm

mr_aj_johnson wrote:Really? Im not really looking but this could tempt me.

If you come all the way out here to buy this, you will have to let me know. Have to get together and chat haha.

As much as I don't want to see it go Eric, good luck with your sale.
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (10vt project)
2007 Mitsubishi Raider(Dakota in disguise)
2014 Chevy traverse (It's what she wanted)
DE80q
 
Posts: 2211
Joined: Mar 4, 2013
Location: York PA 17403

Re: Feeler: very modded 80q maybe for sale

Postby mr_aj_johnson » Mon Oct 15, 2018 5:24 pm

DE80q wrote:
mr_aj_johnson wrote:Really? Im not really looking but this could tempt me.

If you come all the way out here to buy this, you will have to let me know. Have to get together and chat haha.

As much as I don't want to see it go Eric, good luck with your sale.

Would be sweet, but I'm not really in the market. Too many other things going on to have time for another toy. and I promised myself the next work rig would be a wagon.
mr_aj_johnson
 
Posts: 192
Joined: Apr 22, 2013


Return to Swap Meet

Who is online

Users browsing this forum: No registered users and 2 guests

cron