Who is planning to come to Carlisle this year?

Meet and greet

Who is planning to come to Carlisle this year?

Postby DE80q » Mon Feb 27, 2017 9:17 am

With March soon apon us, Carlisle will be here before you know it. I know Mike has started getting ready, and I know of a few others as well. Who else is planning to come? Last year's event went well, despite the combining of the 2 shows. I'm looking forward to seeing you everyone again this year.
"If you cant find one, make one!"


91 Audi 80q -10vt project
07 Mitsubishi Raider (Dakota in disguise)
DE80q
 
Posts: 2027
Joined: Mar 4, 2013
Location: York PA 17403

Re: Who is planning to come to Carlisle this year?

Postby Grillage » Mon Feb 27, 2017 3:46 pm

I am! Bringing the B4 this year.
CURRENT
1995 90 Quattro
1994 Cabriolet - 5 speed
1986 Maserati Biturbo Spyder
2011 A4 Avant


PAST
1993 Audi 90 CS Quattro - 1990 CQ - V8 - 1995.5 Audi S6 - 1993 Audi V8 - 2013 A5 Prestige
User avatar
Grillage
 
Posts: 620
Joined: Feb 28, 2013
Location: Cincinnati, OH

Re: Who is planning to come to Carlisle this year?

Postby oil_me » Mon Feb 27, 2017 8:17 pm

I'm planning on being there this year. Not like my uh no-show last year.
'91 80Q m-TDI DD 51.8 mpg-"the oil_can" http://www.theprojectpad.com/viewtopic.php?f=11&t=1529&start=175
'89 80Q shady 80
'99.5 Jetta TDI RC3e/Shine susp. 47-52 mpg
'85 BMW R80 (exploded diagram) next in line
User avatar
oil_me
 
Posts: 141
Joined: Aug 31, 2014

Re: Who is planning to come to Carlisle this year?

Postby Sparkyjack » Mon Feb 27, 2017 10:24 pm

I'll be there!
After dropping my stuff off at home last year I went out for lunch in the coupe, it died on the road.
I flat beded it home and spent the rest of May and most of June figuring out what happened, replacing the gear and then getting the timing right so that it would run.
Since then I've had the replaced the front Comtrol arms with forged ones, the rear subframes with a late model one that has sway bar mounts I also got all that and the shock towers powder coated. I've swapped shocks and springs twicce and cleaned out the oil pan.
I'm now in the middle of replacing the rear speakers and adding keyless entry.

First alignment was clearly done by a monkey, second alignment (by an Audi enthusiast) resolved a bunch of quirks.

I need to finish up the speakers, keyless entry, glue up a piece of plastic I broke and do some other more minor stuff.
I might just make it if I burn some PTO.
Last edited by Sparkyjack on Thu Mar 02, 2017 10:30 pm, edited 3 times in total.
Jack
There are 16 rings on my driveway
'90 CQ, '01 b5q(dogs)(auto), '09 b8q, '17 b9q (wife's)(auto)
Sparkyjack
 
Posts: 71
Joined: Jan 3, 2015
Location: Westminster, MD

Re: Who is planning to come to Carlisle this year?

Postby Peters » Wed Mar 01, 2017 12:36 pm

i had a similar issue with my black coupe..turns out that all the issues were due to a bent front subframe - My mechanic (Lee Malo - Advanced Technologies in Gloucester MA) spent a lot of time measuring the subframe and ball joint/control arm spacing. We ended up replacing the front subframe and now the car tracks true
Peters
 
Posts: 54
Joined: Mar 10, 2013

Re: Who is planning to come to Carlisle this year?

Postby gabriel.b » Sat Mar 11, 2017 6:30 pm

I want to go, probably in the RS4 though
gabriel.b
 
Posts: 50
Joined: Oct 14, 2015

Re: Who is planning to come to Carlisle this year?

Postby AudiSport4000 » Thu Mar 16, 2017 9:22 pm

I've been slackin. I'll be there fo sho. I'll get a thread up soon!
1986 4kq CE
1991 200 20v wagon
AudiSport4000
 
Posts: 710
Joined: Feb 27, 2013
Location: Fort Wayne, IN

Re: Who is planning to come to Carlisle this year?

Postby Fattyalx » Thu Mar 30, 2017 12:59 pm

If I get my megasquirt done, I'll be there in the 200!!
Fattyalx
 
Posts: 77
Joined: Nov 12, 2015


Return to Gatherings

Who is online

Users browsing this forum: No registered users and 1 guest