84 4k mc2 swap on ms1-extra

Discuss VEMS and other standalone ECUs

84 4k mc2 swap on ms1-extra

Postby Audidoug » Sat Sep 19, 2015 1:40 pm

So I have a 84 Audi 4000Quattro that has been gutted and roll caged, has a 2.1 block bored out to replace my mc2 block, ported and polished head, intake, and exhaust manifold, exhaust manifold and k24 have been ceramic coated, 3" pipe out, 32lb injectors, air to water intercooler, ran by ms1-extra fired by 5 window hall sensor. I am having issues finding a timing and fuel map if there is anyone that could help a a b2 fanatic it would be awesome
Audidoug
 
Posts: 3
Joined: Sep 19, 2015

Re: 84 4k mc2 swap on ms1-extra

Postby DE80q » Sat Sep 19, 2015 8:41 pm

Shoot deaner a PM. His setup is for an MC1, but should e a good starting point.
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (10vt project)
2007 Mitsubishi Raider(Dakota in disguise)
2014 Chevy traverse (It's what she wanted)
DE80q
 
Posts: 2135
Joined: Mar 4, 2013
Location: York PA 17403

Re: 84 4k mc2 swap on ms1-extra

Postby Audidoug » Sat Sep 19, 2015 11:16 pm

Cool thanks
Audidoug
 
Posts: 3
Joined: Sep 19, 2015

Re: 84 4k mc2 swap on ms1-extra

Postby deaner » Mon Sep 21, 2015 11:07 am

I have an msq that vt10vt sent over to me a couple of weeks ago. I've never driven on it, just got it idling decently. Is your car running at all audidoug? I'm not exactly sure what etiquette is with sharing maps and all, being as it isn't mine. I was in the same boat as you a couple weeks ago and vt10vt shared an old one with me. If it was mine I'd gladly send you the msq, maybe Shawn will pipe up or someone can fill me in on protocol when using and/or sharing someone else's map?
deaner
 
Posts: 217
Joined: Feb 28, 2015

Re: 84 4k mc2 swap on ms1-extra

Postby vt10vt » Mon Sep 21, 2015 11:12 am

Yeah go for it, I'm happy to share any of my work.
-Shawn C.
2001 S4 6spd Avant blk/blk - stock daily
2002 01E B6 A4 Built FYF, Built 1.8T, HX35 ~330whp
1989 MC-1 200 Avant- MS1 -Gone but will never forget her lessons
1987 5ktq Sedan - Best $500 beater ever
User avatar
vt10vt
 
Posts: 925
Joined: Mar 10, 2013
Location: Winooski, VT

Re: 84 4k mc2 swap on ms1-extra

Postby Audidoug » Mon Sep 21, 2015 11:07 pm

Thanks anything helps im pulling my hair out trying to get this hall sender trigger angle timing issue every time I get the fixed angle back down to -10 it dies then it's a beast to get started again
Attachments
0701151713b.jpg
0701151713b.jpg (3.17 MiB) Viewed 2194 times
FB_IMG_1430969472160.jpg
FB_IMG_1430969472160.jpg (72.52 KiB) Viewed 2194 times
Audidoug
 
Posts: 3
Joined: Sep 19, 2015

Re: 84 4k mc2 swap on ms1-extra

Postby deaner » Tue Sep 22, 2015 7:55 am

vt10vt wrote:Yeah go for it, I'm happy to share any of my work.


Cool man, just wanted to make sure.

Audidoug, PM me your email address.
deaner
 
Posts: 217
Joined: Feb 28, 2015


Return to Standalone Engine Management

Who is online

Users browsing this forum: No registered users and 1 guest

cron